Contact Information

Toll Free
888-335-DACC

Telephone

225-357-5816

FAX

225-357-5817

Postal address

5235 Adams Avenue
Baton Rouge, LA 70806

Electronic mail

Sales@DACC.com

Copyright © 2009
DACC Industries
All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.(DACC Industries is a Trade Name of LPCII, LLC)

The HL-93 Tracing System

Performance, Reliability and Consistency of Operation

Building on the performance and reliability of the HL-90 tracing system, the Linatrol Products Group is proud to offer the technological superiority of the HL-93 tracing system to the cutting machine industry. Advances in technology allow the HL-93 unparalleled flexibility on machines using cutting tables up to 1.5 meters wide. The introduction of gas controls, 4 individual torch controls, a more powerful drive amplifier, plus a newly designed and improved tracing unit, ensure that the HL-93 will provide reliable and consistent operation for years to come.

With system features like automatic pattern acquisition, torch off-pattern interlock, electronically controlled kerf adjustment, bi-directional tracing, manual direction control, corner slowdown, improved tracing accuracy on sharp corners and optional cutting controls, the HL-93 will prove to be all the control required for small cutting machines. With over 40 years of experience servicing the steel cutting industry, get Linatrol know-how working for you and see the difference our rugged reliability can make.

Features and Options

	Universal compact design to suit all small machines.
	2 drive packages to choose from for speeds of either 1.5 or 3 meters/minute.
	Separate lightweight tracer suitable for lightweight machine frames.
	Operator control panel with controls for gas, tracer and 4 individual torches.
	Enhanced cornering circuitry for improved low speed tracing.
	Command Mark slowdown for improved cornering.
	Electronically controlled kerf adjustment for cuts up to 3 mm wide.
	Automatic pattern acquisition with bi-directional tracing selection.
	Torch off-pattern interlock.
	Manual direction control for straight line cutting.
	CNC compatible - optional interface connection.
	Drives available with optional encoders for CNC operation.

Performance Specifications

	Power: 110/115/230 VAC +10%/-15%, 50/60 Hz, single phase with ground connection.
	Tracing Accuracy: +/- 0.25 mm deviation from a straight pattern edge.
	Machine Speed: 1.5 or 3 meters/min may be selected.
	Tracing Speed: square corners to 1 m/min, 1 mm radius corners up to 1.5 m/min, 3 mm radius corners up to 3 m/min.
	Kerf Offset: adjustable for cuts up to 3.0 mm wide.
	Lead: 3 mm standard, others available for special applications.
	Patterns: Silhouette or Line type (minimum line width is 0.6 mm).
	Environment: operating temperature 0°C to +50°C, storage temperature -18°C to +65°C, humidity to 95% (non condensing).