Contact Information
Toll Free
888-335-DACC
- Telephone
- FAX
- Postal address
Baton Rouge, LA 70806
- Electronic mail
Copyright © 2007
DACC Industries
All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.(DACC Industries is a Trade Name of LPCII, LLC)
Easy to Use.....
The Picopath was designed so that a new
operator can step up to the control and begin cutting parts immediately,
with virtually no training and little need for the operators manual.
It has a very simple keypad and a large, 16 line, backlit LCD
graphic display. The control is menu driven so the operator can
quickly and easily perform the desired function by pressing one
of the eight soft keys corresponding to the available menu items.
The Picopath also displays the shape library parts and graphically
prompts for their parameters so these parts can be quickly cut
without referring to a manual.
Advanced Contouring
Performance
The Picopath utilizes true closed loop servo control with encoder feedback for both position and velocity control. This control loop is updated every millisecond to provide accurate, smooth contouring motion. The Picopath also has an advanced hardware and software design that makes it capable of virtually unlimited speed/resolution performance.
Full Featured
Operation
The Picopath has all the capabilities of a modern cutting machine control as well as several productivity-increasing features found only in Picopath. Also, all these features come standard in the Picopath - there is nothing optional to be ordered.
Parametric Shape Library
Powerful library of 33 pre-programmed parametric shapes from which over two hundred different shapes can be created.Graphic display of shape library parts and parametric prompts.Chain-cut capability with programmable scrap clearance and common line cutting.
Manual Data Input (MDI)
 | Create and edit part programs
using either EIA (RS-274D) or ESSI (ISO 6582) part programming
languages.
| Scrolling part program display.
| Edit downloaded part program
at the control.
| Display comment text of downloaded
programs for operator information.
| |
Trace/Teach*
| Converts optical tracings into
EIA (RS-274D) or ESSI (ISO 6582) programs.
| Automatic part closure detection
automatically stops the tracer at the | end of the template. Allows multiple pierce points,
lead-ins, leadouts and rapid traverse segments for multiple cut
pieces in one program.
| Trace at slow speed for best
part accuracy and cut (with acceleration and deceleration) at
optimum speed for your process.
| Upload taught part to CAD system,
remote host computer or other storage device.
| Digitally calculated kerf compensation
extends kerf range of tracing system.
| * Requires separate optional
tracer control system which can be supplied if required
| |
CAD Download
| Download part programs via built-in
serial port using RS-232 or RS-422 link.
| Accepts EIA (RS-274D) or ESSI
(ISO 6582) part programs.
| Auto-reload feature allows downloading
unlimited length programs.
| Dialog mode allows machine operator
to review and select programs for download.
| |
Programming Options
| English and Metric operation
for worldwide use.
Kerf compensation with programmable
kerf value.
| Automatic corner alignment automatically
positions part in desired corner of the plate | with the specified scrap clearance. Mirror part in both X and Y
axis.
| Rotate part with 0.01 degree
resolution.
| Scale part from 0.000001 to
99.999999 times original size.
| Repeat shape with three grid
patterns (straight, stagger and nested) for automatic cutting
of | multiple pieces. Battery-backed memory for storage
of up to 64 part programs using sophisticated workfile | part manager. |
Performance Features
| Digital servo positioning control
for any cutting machine. Programmable cut speeds.
| Continuous path speed ensures
highest cut quality.
| Automatic corner slowdown for
clean, sharp corners.
| Increase/decrease speed on-the-fly
as required for best cut quality.
| Automatic plate alignment corrects
for skewed plates.
| On-path backup with off-path
re-pierce and return-to-path functions for easy, accurate cut-loss
recovery.
| Machine homing to limit switch
and encoder marker for calibration.
| Rip mode for straight line cutting.
| Jog controlled cutting.
| Punch or powder marker capability.
| Manual jog control with position
read-out.
| |
Installation
and Setup Features
| Selectable axis control orientation
for compatibility with all cutting machines.
| Complete oxy-fuel interface
with programmable preheat, ignition and creep time.
| Complete plasma interface with
programmable purge and ignition time and arc-transferred feedback.
| Motorized torch lifter control.
| Programmable servo gains, machine
parameters, speeds and communication parameters for flexible
application.
| Interfaces to most optical tracing
systems for integrated control.
| Complete built-in diagnostics
for check-out and test.
| |
Specifications
| 240 x 128 pixel, 16 line x 40
column backlit liquid crystal display.
| Industrial grade conductive
rubber keypad with tactile feedback.
| 256K bytes of battery backed-up
part program memory.
| Non-volatile storage of all
setup data.
| Universal AC input (85-135 or
180-250V AC at 47-63 Hz).
| Optically isolated ±10V
drive outputs and incremental encoder inputs.
| 10 dedicated plus 2 general
purpose 24V/1A DC outputs and 10 dedicated plus 2 general purpose
24V DC inputs for gas/plasma control.
| Optically isolated RS-232C/422
port operates up to 19.2K baud.
| Dimensions: height 10.5"
(267mm); width 12" (305mm); depth 8" (203mm).
| Weight: 17 lbs. (7.7 kg).
| Operating environment: 0 to
50C (32 to 122F); 95% relative humidity (non-condensing).
| |
