Contact Information
Toll Free
888-335-DACC
- Telephone
225-357-5816
- FAX
225-357-5817
- Postal address
5235 Adams Avenue
Baton Rouge, LA 70806
- Electronic mail
Sales@DACC.com
Copyright © 2009
DACC Industries
All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered
trademarks of their respective companies or mark holders.(DACC
Industries is a Trade Name of LPCII, LLC)
Compact, light, flexible with sophistication and powerful processing that is Easy to use.
Utilizing the latest in PC technology to yield a product that is truly World Class .
Evaluate the product structure and see how leading edge PC technology is integrated into a rugged and advanced automation control for your cutting needs. This is NOT! just another control - IT IS, an essential tool to generate DYNAMIC PROFITS for you.
User interface Just like any Windows system, the controller can be operated with a mouse or with a standard keyboard.
All Standard Windows Features Available:
Windows Messaging, Schedule, Word Processing, Calculator, ...
Any Windows software Can be installed and used in the CNC-controller without disturbing the cutting process. Cutting related operations always have first priority.
Windows-operations like Shut Down and Restart do not interfere with the cutting process.
Networking:
Simple to connect to your company network. Ethernet interface card is standard. Data transfer is just like in any computer in your network. Cutting machine status can be monitored through the network
ROBOTIC, ESSI, EIA and DXF Codes accepted. The controller recognizes the format automatically. Any CAD and/or nesting software can be used
Auto-nesting, Bridging and Machining Allowances are added to the old features like super flexible macro figures, remnant tracking and manual programming.
Graphic Screens for Different Settings: A lot easier to use with less training.
 | Casing 205/428/295 mm (W/H/D), fitting compatible with Picopath |
| Casing 205/428/295 mm (W/H/D),
fitting compatible with Picopath
| Twin Fused Inlet Socket with
Main Power Switch
| Two 37 Pin Connectors, Pin To
Pin compatible with Picopath
| Standard RS-232 D9 connector
| Standard PC-Power Source with
selector 115/230 V
| Industrial Grade CPU 586 / 133
Mhz / 4 Mb / Flash Disk for setup information
| Minimum 1 Gb Hard Disk
| 3.5" 1.44 Mb Floppy Disk
| PC-104 size Motion Control Card
for Two Axis
| PC-104 size Digital I/O Card
(16 input lines and 16 outputs max. 42V/1.5A)
| 10,4" TFT Color Flat Panel
Display
| Retractable Standard Keyboard
with Arm Rest
| 10 Control Push-Buttons with
Indicator Lamps
| Joystick
| Speed Potentiometer 0-100%
| DOS based Operating Software
(Principally the same as in ProMotion R23)
| Pro3Nest Office Software for
Programming, Nesting and Remnant Tracking
| WinLink and LinkList Software
for DNC Communication, Work List and Log
| |
ProMotion R23 - DOS and NT Versions.
The ProMotion R23 series
The ProMotion series has reached new levels with its latest addition, the ProMotion Win - controller. The new controller, running on Windows NT operating system, has abilities never before seen in this field - all as easy to use as the Windows graphical user interface.
All ProMotion R23 Version Controllers are available as turn key cutting solutions - with full machine cutting controls available on the controller and a broad range of Linatrol servo systems.
Efficient, advanced - and easy.....
The ProMotion controllers are known to be the most advanced machines available, both in terms of efficiency and ease of use. For retrofitting, the ProMotion controllers can be delivered with Linatrol servo drive systems and all the necessary gas/torch control switches built in. These, along with it’s other abilities, make the ProMotion an elite controller.
The ProMotion R23
| 586DX CPU, 16 MB RAM | ||||||||||||||||||||||||||||||||||||||
| At least a 2 GB Hard Drive.
| 1.44 MB 3.5 inch FDD for data transfer, safety
copies and for software upgrades.
| Top quality 12.1 " TFT SVGA color screen.
| RS-232 port for data transfer to and from
other systems (DNC).
| OPTICS/CNC selector.
| Servo outputs for cross and rail axis.
| Solenoid outputs for gas cutting, plasma
cutting, powder marking and drill marking.
| Output for torch hold function in plasma
cutting.
| 8 inputs - e.g. plasma main arc.
| True Multitasking
| Over 60 macro figures in shape library, interactive
easy dimensioning on all shapes.
| Shape of dimensioned macro figure can be
modified and edited.
| Nesting, Manual Data Input and teach Trace.
| Reads ESSI and EIA, metric and inches.
| The whole cutting program can be seen on
screen before cutting.
| A cursor follows on the screen , to indicate
location of the torch. Position can also be seen on a second
zoom window.
| Plate alignment to correct angled plates
| Possible to rotate and mirror shapes.
| Automatic Repeat and fill plate function.
| Remnant plate Nesting and stock.
| |
ProMotion R23 - DOS version
The DOS version is by far the most popular of the ProMotion controllers. Used all over the world, the DOS version can be found on cutting machines produced by major OEMs. The DOS version is known to be extremely reliable and efficient, while still priced modestly.
ProMotion R23 -Win NT Version.
The Windows-version is the latest and most advanced ProMotion controller. Running on Windows NT operating system, the ProMotion Win has all the abilities of a powerful computer workstation plus advanced controlling abilities. With its built-in networking hardware, the ProMotion Win can be a part of the company network with ease, and the multi-processor system ensures reliable cutting - even while Windows is being restarted! Using the ProMotion is now as easy as using any Windows application.
